Usable Tools
Workpiece
Usable Workpieces and Sizes
The materials that can be milled by this machine are as follows. To prevent machine malfunctions, be sure to check the material before milling.
- Zirconia
- Wax
- PMMA
- Composite resins
- PEEK
- PEKK
- Glass-fiber-reinforced resin
- CoCr sintered metal
- Polycarbonate
The types and sizes of the workpieces that can be milled by this machine are as follows.
| Type | Size | |
|---|---|---|
| Disc type (with step) |  |
Step section: 98.5 mm (3.88 in.) (diameter), 10 ± 0.3 mm (0.39 ± 0.01 in.) (height) Body section: 95 mm (3.74 in.) (diameter), 60 mm (2.36 in.) max. (height) |
| Pin type |  |
Pin diameter: 6 mm |
Milling bur
Usable Milling Bur Sizes
* The shape of the milling bur is merely an example. Select the milling bur that matches the application. Contact your authorized DGSHAPE Corporation dealer or visit our website to purchase items.
- : 40 to 55 mm (1.58 to 2.16 in.)
- : ø4 mm (ø0.16 in.)
Adapter/Adapter ID
Workpieces are used while set in adapters labeled with adapter IDs. Use the adapter ID to manage the work situations of workpieces.
Once you have started using a workpiece, do not remove it from the adapter until you are finished using it. If you remove a workpiece that you have started using from the adapter, you will no longer be able to manage information such as the position information in the CAM data. It may also become impossible to correctly read the position at which to resume milling.
- : Adapter
- : Adapter ID
When You Want to Use Seven or More Adapters
Six adapters are included with the machine. If you want to use seven or more adapters, purchase optional products. You can manage up to 100 adapters (IDs: 1 to 100).