Incorrect operation may cause injury

WARNING
	Always unplug the power cord when attaching or removing parts and optional parts and when performing cleaning or maintenance that does not require the machine to be connected to a power source. Attempting such operations while the machine is connected to a power source may result in injury or electrical shock.
	Keep children away from the machine. The machine includes areas and components that pose a hazard to children and may result in injury, blindness, choking, or other serious accident.
	Never attempt to disassemble, repair, or modify the machine. Doing so may result in fire, electrical shock, or injury. Entrust repairs to a trained service technician.
	Be sure to follow the operation procedures described in this machine's documentation. Never allow anyone unfamiliar with the usage or handling of the machine to touch it. Incorrect usage or handling may lead to an accident.
	Never operate the machine while tired or after ingesting alcohol or any medication. Operation requires unimpaired judgment. Operating with impaired judgment may result in an accident.
	Be careful around the milling tool. The milling tool is sharp. Broken milling tools are also dangerous. To avoid injury, exercise caution.
	Never use a milling tool that has become dull. Perform frequent maintenance to keep the machine in good working order. Inappropriate usage may result in fire or injury.
	Caution: sharp components. This machine contains areas that are sharp (Cover edges, etc.). To avoid injury, exercise caution.

CAUTION
	Conduct operations in a clean, brightly lit location. Working in a location that is dark or cluttered may lead to an accident, such as becoming caught in the machine as the result of an inadvertent stumble.
	Never climb or lean on the machine. The machine is not made to support a person. Climbing or leaning on the machine may dislodge components and cause a slip or fall, resulting in injury.
	Never operate the machine if the cover is cracked or broken. Doing so may result in injury. If the cover is cracked or broken, contact your authorized your authorized Roland DG Corporation dealer.
	Remove the milling tool before performing replacement work. Contact with the blade may cause injury.