Specifications
DWX-53D | ||
---|---|---|
Millable material*1 |
Zirconia, PMMA, PEEK, composite resin, wax, dental non-cast cobalt-chromium alloy (unsintered) (Zirconia, wax, PMMA, composite resin, PEEK, CoCr sintered metal, glass-fiber-reinforced resin, PEKK, polycarbonate) |
|
Loadable workpiece shape |
Disk-type (with step) workpiece |
Step section: 98.5 mm (3.88 in.) (diameter), 10 ± 0.3 mm (0.39 ± 0.01 in.) (height) Body section: 95 mm (3.74 in.) (diameter), 60 mm (2.36 in.) max. (height) |
Pin-type workpiece | Pin diameter: 6 mm (0.24 in.) | |
Loadable workpiece weight | 850 g (1.87 lb.) or less | |
Number of loadable adapters | 1 | |
Operating speed | X, Y: 3,000 mm/min (118.11 in./min) max., Z: 2,700 mm/min (106.29 in./min) max. | |
Spindle motor | Brushless DC motor | |
Spindle rotating speed | 6,000 to 30,000 rpm | |
Rotary axis travel angle | A: ±360°, B: ±35° | |
Number of milling burs housed | 15 | |
Attachable milling bur | Shank diameter: 4 mm (0.16 in.), length: 40 to 55 mm (1.57 to 2.17 in.) | |
Compatible compressed air | 0.4 MPa | |
Interface | USB | |
Control command sets | RML-1, NC code | |
Power requirements | 100 to 240 VAC ± 10%, 50/60 Hz (overvoltage category: II, IEC 60664-1), 1.8 A | |
Power consumption | Approx. 170 W | |
Operating noise |
During operation: 70 dB (A) or less (when not cutting) During standby: 48 dB (A) or less |
|
External Dimensions | Width × depth × height: 555 × 725 × 705 mm (21.85 × 28.54 × 27.76 in.) | |
Weight | 105 kg (231.49 lb.) | |
Installation environment |
Indoor use at altitudes up to 2,000 m Temperature: 5 to 40°C, humidity: 35 to 80 % (no condensation) Ambient pollution degree: 2 (as specified by IEC 60664-1) Short-term temporary overvoltage: 1,440 V, long-term temporary overvoltage: 490 V |
|
Included items | Power cord, power plug adapter, USB cable, Safety Precautions, Quick Access Guide, detection pin, automatic correction jig, torque screwdriver, T-shaped hexagonal screwdriver, L-shaped hexagonal wrench, collet attaching/detaching jig, milling bur holder, milling bur positioner, regulator, adapter ID labels, standard adapter, open edge adapter, adapter rack, pin-type workpiece adapter, milling burs, etc. |
*1 Even when made from the described materials, some workpieces cannot be milled due to specifications or physical properties. For more information, contact your authorized Roland DG Corporation dealer.