Connecting to the Computer

Table 1. Required item
USB cable

USB cable
Procedure
  1. If the machine's power switch is off, switch it on.

    When the power switch is switched to on, the machine starts the initial operations. When the status light stops flashing and remains steadily lit, the initial operations are complete.

    DWX-53DC_SwitchOn
  2. Connect the machine to the computer using a USB cable.
    IMPORTANT
    • Before connecting the machine to the computer using a USB cable, be sure to install the driver.
    • If connecting more than one unit of this machine to a single computer, see "Connecting Multiple Units."
    • Use the included USB cable.
    • If you will connect a conversion cable, separately prepare a USB cable whose total length, including the length of the conversion cable, is 3 m (118.11 in.) or less. A longer total cable length may lead to malfunctions.
    • Do not use a USB hub. Connection may not be possible.
    • Do not bind the USB cable and power cord. Binding the USB cable and the power cord may produce noise or the like, resulting in a malfunction.
    PC_Connect
    MEMO Use one of the following three combinations for the machine and the computer to connect.
    • Machine + desktop PC or laptop
    • Machine + tablet
    • Machine + mini PC + touchscreen display

    Using a USB cable to connect the machine and a computer on which the driver has been installed adds the DWX-53DC to Devices and Printers, enabling the use of the machine.