Checking the Included Items

The following items are included with the machine. Make sure they are all present and accounted for.

powercode_jp

Power cord, power plug adapter (1 each)

 USB cable

USB cable (1)

 regulator

Regulator (1)

Drain hose (1)

 air_hose

Air hose (1)
DWX-53DC_AdapterForTable

Adapter (6)

 AutomaticCorrectionJig

Automatic correction jig (1)

 DWX-53DC_PinAdapter_ForTable

Pin-type workpiece adapter (1)

 DWX-53DC_Special_Adapter_ForTable

Open edge adapter (1) *1
DWX-53DC_ToolAdapter_ForTable

Milling bur positioner (1)

 DWX-53DC_Toolholder_ForTable

Milling bur holder (15)

 DWX-53DC_DetectionPIN_ForTable

Detection pin (1)

 ToolStocker

Tool rack (1)
Wrench

Collet attaching/detaching jig (1)

 Hex_T-Driver

T-shaped hexagonal screwdriver (1)

 Hex-L

L-shaped hexagonal wrench (1)

 Brush

Brush (1)
Mounting_screw

Mounting screws (25)

 Screw

Screws

(adapter spare; 8)

 Screw_3

Screws

(pin-type workpiece adapter spare; 2)

 Screw_2

Black screws

(for regulator; 4)
Cloth_for_care

Cloth for care (1)

 DWX-53DC_ToolForTable

Milling burs (4)*2

 DWX-53DC_TorcDriverForTablel

Torque screwdriver*3
DWX-53DC_dust-proof_cover

Dust-proof cover (1)

 holder_right

Right tablet holder (1)

Screw (1)

 holder_left

Left tablet holder (1)

Screw (1)

 rack

Adapter rack (1)
cushion

Cushions

(for tablet; 4)

 DWX-53DC_DummyPinCleaner_ForTable

Dummy pin cleaner (1)

 Adapter_ID_labels

Adapter ID labels

(optional; 1)*4

 GuideManual

Quick Access Guide (1)
ManualForTable

Safety Precautions (1)
*1 Affix an (optional) adapter ID label to the adapter base before using this adapter. You can use any adapter ID label number.
*2 ZRB-200D, ZPB-100D, ZPB-50D, and ZPB-30D (1 each)
*3 Handles (2), bits (1.5 mm [0.06 in.], 2.5 mm [0.1 in.], and 3.0 mm [0.12 in.]; 1 each), and sleeves (0.3 N·m, 0.6 N·m; 1 each)
*4 Use these labels when you have purchased optional adapters.
IMPORTANT

Do not loosen screws with a torque screwdriver with the sleeve()attached.

Doing so may damage the sleeve. Before loosening screws, remove the sleeve from the torque screwdriver.
WithoutSleeve
IMPORTANT

Before tightening a screw that has a specified tightening torque, be sure to attach a sleeve. Check the marking on the sleeve()and use a sleeve that matches the tightening torque value.

Failure to attach a sleeve will cause a torque in excess of the permitted amount to be applied, which may damage parts and materials.
WithSleeve