Switching the Power On

Procedure
  1. Attach the dust-proof cover to the milling area.

    To prevent the work area from getting dirty from milling waste ejected from the milling area, attach the dust-proof cover before using this machine.

    MEMO Attach the dust-proof cover so the handle is in the upper-right corner. Check that the magnets on the edge of the cover attach to the mounting frame.
    DWX-53DC_dust-proof_cover_close
  2. Close the following three covers.
    • Milling area cover
    • Adapter area cover
    • Tool area cover
    DWX-53DC_Cover_Close
  3. Switch on the machine's power switch.
    The machine starts the initial operations. When the status light stops flashing and remains steadily lit, the initial operations are complete.
    DWX-53DC_SwitchOn_INS
    IMPORTANT Do not open the covers during the initial operations.