Installing the Driver in Windows 10 (Procedure A)

This is the operation procedure for Windows 10 (version: 22H2).

Procedure
  1. Connect the machine to the computer with the USB cable and turn on the machine.
  2. Open the Control Panel.
    Search for Control Panel with the task bar search and open it.
  3. Right-click Devices and Printers and select Open.
  4. Check that the model you are using is displayed under Unspecified.
  5. Right-click the icon of the model you are using, and then click Remove device.
  6. When the message Are you sure you want to remove this device? is displayed, click Yes.
  7. Check that the icon for the model you are using is no longer displayed under Unspecified.
  8. Disconnect the USB cable connecting the machine to the computer, and then reconnect these devices.

    If the printer icon for the machine you are using is displayed under Printers, the driver has been successfully installed.

    If the problem cannot be resolved by following this procedure, perform the procedure under "Windows 10 (Procedure B)." Installing the Driver in Windows 10 (Procedure B)