102B-0000The spindle motor temperature is too high.

Situation/Error Cause 1
  • The spindle unit is overloaded.
  • The milling bur is worn.
  • A workpiece that cannot be milled by the machine is being used.
  • The milling conditions are too strict.
Procedure
  1. Turn off the power.
  2. Check the milling bur, the workpiece, and the CAM settings as well as the shape specified in the CAD data.
  3. Allow the machine to rest for some time before turning the power on.
    The motor may have overheated.
Situation/Error Cause 2
  • Milling waste has adhered to the spindle.
Procedure
  1. Turn off the power.
  2. Allow the machine to rest for some time before turning the power on.
    The motor may have overheated.
  3. Perform spindle run-in.
    Perform Spindle Run-in
If the Error Occurs Again

There is a possibility that the spindle unit is defective.

To replace the spindle unit, contact your authorized DGSHAPE Corporation dealer.