Determining the LAN Address
In this situation, determine the address as shown below, and then manually configure the network.
IMPORTANT
If using the Windows firewall function, set it so that the following TCP port numbers are not blocked.
The following TCP port numbers are used during communication between the machine and a computer over a LAN connection.
- 9100
- 9500
- 9501
IMPORTANT
The network settings listed here are only an example. The settings given in this manual do not match every environment.
In an environment where the computer being used is connected to multiple network devices and the Internet, inappropriate settings will have a large effect on the entire network. For detailed information about the settings, consult your network administrator.
Computer | Machine side | Remarks | |
---|---|---|---|
IP address | 192.168.1.XXX | 192.168.1.YYY | Ensure that these are unique numbers compared to other network devices and that "XXX" and "YYY" represent unique numbers from 1 to 254. |
Subnet mask | 255.255.255.0 | 255.255.255.0 | Set the machine and the computer to the same number. |
Default gateway | 192.168.1.AAA | 192.168.1.BBB | "AAA" and "BBB" represent unique numbers from 1 to 254. This setting may not be necessary. For details, check with your network administrator. |