Chelating reagent (ZCH-250D)
The ZCH-250D (hereinafter referred to as the "chelating reagent") works to make calcium and other substances contained in water inactive. Including it in this product makes it easier to clean off milling powder that adheres to the machine and the cutting tool after milling.
To purchase chelating reagent, contact your authorized DGSHAPE Corporation dealer or access our website (https://www.dgshape.com/).
In the event of additive or chelating reagent ingestion or physical distress
- In the event of contact with the eyes, immediately flush with water for at least 15 minutes. If eye irritation continues, seek treatment by a physician.
- In the event of contact with skin, immediately wash with soap. If irritation or inflammation occurs, seek treatment by a physician.
- In the event of ingestion, do not induce vomiting, and immediately seek treatment by a physician. Forcibly inducing vomiting may lead to danger of choking.
- If odor leads to physical distress, move to a well-ventilated location and rest quietly. If dizziness or nausea persists, seek treatment by a physician.
IMPORTANT Refer to the appropriate safety data sheet (SDS) for the chemical substances used in the additive and chelating reagent and the safety related to those substances.
https://www.rolanddg.com/en/about-us/sustainability/safety-data-sheet
MEMO The expiration date of the chelating reagent is one year from the date of manufacture (written on the unit packaging box).