Attaching the Regulator to the Side of the Machine

Procedure
  1. Loosen the stay screws, and then remove the regulator.
    DWX-43W_regulator_01
  2. Temporarily tighten the B screws on the side of the machine.

    Use the screw holes at the bottom of the side of the machine. There are screw holes for attaching the regulator at the same height on both sides of the machine. You can attach the regulator on either the left side or right side of the machine.

    DWX-43W_regulator_03
  3. Attach the regulator to the temporarily tightened B screws.
    DWX-43W_regulator_12
  4. Fully tighten the B screws to secure the regulator.
    DWX-43W_regulator_13