Key Assignments/Shortcuts

Top-down view

Front view

Side view

Isometric view

Rotates the view (0°/180°)

Selects multiple items.

Forcibly displays all items between the two selected items.

Deletes the selected item.

Creates a DGSHAPE CAM backup file for support.

Opens the stock library.

Selects multiple pins.

You can use this operation to select all the support pins of the selected dental prosthesis. When no object is selected, all the supports within the job are selected.

Opens the Curves and Surface Tools toolbar.

Saves the DGSHAPE CAM project.

Shows/hides the fixture.

Shows/hides the cylinder cap.

The cylinder cap indicates the mask that covers the hole, such as that for screw retaining.

Shows/hides the undercut.

The undercut is the part that is not reached by the cutting bur from 0°/180° and is displayed as a dark-blue, shaded surface. To mill the undercut area, you have to enable the rotation axis/tilt axis.

Redo: Performs the previous operation again.

Undo: Undoes the previous operation executed in DGSHAPE CAM.

Shows/hides the gray cavity/prep cap.

Switches the cavity axis/insertion direction/drawing path.

Shows/hides the cavity fit adjustment.

Shows/hides the sintering protection.

Shows/hides the replaced interface mesh.

Shows/hides the sub axis.

Switches the view between the imported file, translucent STL, and wire mesh.

Imported file/STL view: shaded or rendered