Register the media.

Procedure
  1. Tap Panel_Icon_SetupSetup.
  2. Select New.
  3. Tap Next.

    DA-640_panel_setup_new-media

  4. Enter a new media name and tap OK.

    DA-640_panel_setup_new-media_input-name

  5. Tap Next.
  6. On the Select Sheet Type screen, select Opaque/Transparent and tap Next.
  7. The Sheet Settings screen appears. Configure the settings as shown below depending on the sheet type.
    • For opaque media
      1. Tap Side Margin to set the margin.

        You can select 5 mm (0.2 in.), 10 mm (0.39 in.), or 25 mm (0.98 in.).

      2. Tap OK.
    • For transparent media, etc.
      • Sheet Width setting
        1. Tap Panel_Icon_Edit_02 next to Sheet Width.
        2. Enter the sheet width and tap OK.
      • Sheet Right Edge setting
        1. Tap Change next to Sheet Right Edge.
        2. Tap Panel_Icon_LeftArrow or Panel_Icon_RightArrow to move the carriage's base point mark to the right edge of the media, and then tap OK.
      • Side Margin setting
        1. Tap Side Margin to set the margin.

          You can select 5 mm (0.2 in.), 10 mm (0.39 in.), or 25 mm (0.98 in.).

        2. Tap OK.
  8. Tap Next.
  9. Tap Start Setup.