Changing the Media Settings

Use the following procedure to change the media settings. These settings can only be changed for the media being set up.
Procedure
  1. Set up the media.
  2. Tap Panel_Icon_Menu.
  3. Tap Media Settings - List of Media Settings.
  4. Tap the setting to change to move to the screen for editing this setting.
    The media settings that can be changed are as follows.
    Menu item Reference page
    Print Head Height Changing the Print Head Height
    Feed Correction Manual Adjustment: Reducing Horizontal Bands (Feed Correction)
    Media Gap Adjustment Manual Adjustment: Adjusting the Misalignment of the Ink Landing Position (Media Gap Adjustment)
    Heater Temperature Setting the Print Heater TemperatureSetting the Oven Temperature
    Multi Sensor Adjustment Adjusts the sensor used to make corrections to the optimal condition.
    Media Suction Force Using Media That Wrinkles Easily/Does Not Move Smoothly
    Media Sticking Prevention Using Sticky Media
  5. If you have changed a setting, tap Save.
  6. Tap Panel_Icon_Home.
    The home screen appears.