Select the media.
Procedure
-
Tap
Setup.
The registered media is displayed in a list.
- Select the media name to use.
MEMO
-
Tapping
makes it possible to search the registered media by keyword.
To reset the entered keyword, tap
.
-
Tapping
to the right of the media name will change the symbol to
, and the media will be registered to Favorites.
Tap the Favorites filter
at the top of the operation panel to turn the filter on
and show only favorited media.
Tap
to turn the Favorites filter off.
Tap
to turn the Favorites filter off (
) and reset all keywords.
- Keyword searching and the Favorites filter can be used at the same time.
-
- Tap Next.
-
The Sheet Settings screen appears. Configure the settings as shown below depending on the media.
- For opaque media
- Tap Side Margin to set the margin.
You can select 5 mm (0.2 in.), 10 mm (0.39 in.), or 25 mm (0.98 in.).
- Tap OK.
- Tap Side Margin to set the margin.
- For transparent media, etc.
- Sheet Width setting
- Tap
to the right of Sheet Width.
- Enter the sheet width and tap OK.
- Tap
- Sheet Right Edge setting
- Tap Change to the right of Sheet Right Edge.
- Tap
or
to move the carriage's base point mark to the right edge of the media, and then tap OK.
- Side Margin setting
- Tap Side Margin to set the margin.
You can select 5 mm (0.2 in.), 10 mm (0.39 in.), or 25 mm (0.98 in.).
- Tap OK.
- Tap Side Margin to set the margin.
- Sheet Width setting
- For opaque media
- Tap Start Setup.