Printer

  • This machine is a precision device.
    • Never subject the machine to impacts or excessive force.
    • Never needlessly put your hand or fingers inside the cover, the ink-cartridge ports, or other internal areas of the machine.
  • Install the machine in a suitable location.

    • Install the machine in a location having the specified temperature and relative humidity.

    • Install the machine in a quiet, stable location offering good operating conditions.

  • Leave the printer's main power switched on 24 hours a day.
    • Automatic maintenance may be performed even during standby. Never switch off the main power.

  • The print heads are delicate.

    • Never needlessly touch or allow media to scrape them.

    • The print heads may be damaged if allowed to dry out. The machine prevents desiccation automatically, but improper operation may render this feature inoperative. Operate properly, as specified in this manual.

    • Never leave the machine with an ink cartridge removed. Remaining ink in the printer may harden and clog the print heads.

    • The print heads require daily maintenance and various types of cleaning that depend on the situation. Read this manual thoroughly and perform the appropriate maintenance at the appropriate times.

    • The print heads are components that wear out. Periodic replacement is required, with the frequency of replacement depending on use.

  • This machine becomes hot.

    • Never cover the ventilation or exhaust ports with cloth, tape, or anything else.

    • If the machine is used for a long time, the temperature in the room will also become hot. In order to maintain the specified temperature, use ventilation or air conditioning to avoid overheating the room.