Stopping with the Button

If you detect a hazard during work close to the touch panel, press the button to stop the operation of the machine.

Procedure
  1. Press the button to the right of the touch panel.
    Machine operation will immediately stop.
    EmergencySwitch_pulpit_ON
  2. After confirming that the situation is safe even if this machine starts operating again, turn the part shown in the figure counterclockwise.
    The button pops out.
    EmergencySwitch_pulpit_cancel
  3. Press [TS : RESET] to stop the warning beep.
    MEMO When you use the button to perform an emergency stop, the sub power of the printer unit turns off, and transporter operation also stops.