Setting the IP Address

Procedure
  1. Press [MENU].
  2. Press [▼] several times to display the screen shown below.
    MENU_SYSTEM_INFO
  3. Press [▶] once, and then press [▼] several times to display the screen shown below.
    MENU_SYSTEM_NETWORK
  4. Press [▶] three times to display the screen shown below.
    MENU_IPADDRESS_000000000
  5. Press [▲] or [▼] to select the address number.
  6. Press [▶].
  7. Repeat steps 5 and 6 to set [IP ADDRESS] (192.168.0.XXX).

    The numbers used in this section are examples.

    "XXX" represents a number from 1 to 254. However, be sure to specify a number that is different from the setting you made in Setting the Computer's Network and from the numbers used for other computers and devices.

    For the part corresponding to [192.168.0], apply the same value as the setting of your computer.

    Here, [192.168.0.3] is entered by way of example.

    MENU_IPADDRESS_192168000003
  8. When you finish making the setting, press [ENTER].
  9. Press [◀] to go back to the screen shown below.
    MENU_NETWORK_IPADDRESS