Turning the Power On

Procedure
  1. Turn on all switches on the back of the table control panel.
    The red alarm lamp lights and an alarm sounds.
  2. Check that the area around the machine is free of people and obstacles.
    Be sure to keep everyone away from the area around the machine and to remove any obstacles.
  3. Press and hold [START] in the table control panel for 5 seconds or more.

    Initial operation of the table and lifting device begins.

    Wait for the operation to stop, and then proceed to the next step.

    start_pulpit
  4. Close the printer's front cover.
    CO-640_close-front-cover
  5. Switch on the printer's main power.
    CO-640_main-power-on
  6. Switch on the printer's sub power.
    CO-640_sub-power-on