Precautions When Operating the Power Supply
Always keep the printer's main power switched on.
Never switch off the printer's main power. Leaving the main power enables automatic maintenance to be carried out periodically. If the automatic maintenance is not carried out, it may result in the breakdown of this machine, such as the breakdown of the print heads.
Never switch off the printer's main power or unplug the power cord suddenly while operation is in progress.
Switching off the printer's main power or unplugging the power cord suddenly while operation is in progress may damage the print heads. Be sure to first switch off the printer's sub power. If the printer's main power is accidentally switched off, immediately turn the main power and sub power back on.
| Turns the power for the entire system (such as the printer, the vacuum, the transporter, and the table control panel) on or off. Normally, do not turn the power off. To maintain a state in which printing is possible (such as by preventing ink clogging), do not set this switch to the off position even when the machine is not operating. | |
| Turns the power for the printer on or off. Normally, do not turn the power off. To maintain a state in which printing is possible (such as by preventing ink clogging), do not set this switch to the off position even when the machine is not operating. | |
| Turns the power for devices other than the printer (such as the printer's up/down and forward/backward movement devices and the table control panel) on or off. Unlike the printer, these devices do not perform work that maintains the operating state, so it is not necessary to keep their power turned on. Turn off the power after the day's work is finished. |
Always keep the printer's main power switched on.
To turn off the printer's main power, use the [MAIN POWER] or [PLOTTER] switch on the back of the table control panel.