Using Media That Wrinkles Easily/Does Not Move Smoothly

The platen uses suction to grip the media and keep it stable. The suction force can be adjusted corresponding to the nature and condition of the media.
Procedure
  1. Set up the media.
  2. Click AP-640_Panel_Icon_MENU.
  3. Click the List of Media Settings - Media Suction Force pull-down menu.
    VacuumPower
  4. Select the setting.
    Auto The suction force is automatically adjusted to the optimal level for the width of the loaded media.
    Off Select this setting when you do not want to suction the media.
    10 to 100% When the media is flimsy and cannot move smoothly, decreasing this value (reducing the suction force) may correct the problem.
  5. Click Apply to confirm your entry.
  6. Click Close to return to the original screen.
    MEMO

    • Default setting: Auto

    • Depending on the software RIP you are using, you can also make this setting in the software RIP. When you have made the setting in the software RIP, the machine's setting is ignored.