Important Notes When Performing Output from General Application
Important Notes When Performing Output from Adobe Illustrator
MEMO:
These are cautionary notes on making output from Adobe Illustrator using the BN-20 driver.
They are not applied when VersaWorks is used.
| When you want to print in metallic color and when you want to perform cutting, clear the Print As Bitmap checkbox in the Print dialog box. |
| To display the Print dialog box, click menu. |
| Set the document's color mode to RGB. |
| If you select CMYK mode, the CMYK values will be converted to RGB values when the output is generated. In this case, it may not be possible to perform cutting because the color specified for the driver as the cutting line and the color output from Illustrator differ. |
| Please don't cancel printing by operating Illustrator. |
| If you cancel printing, press the BN-20 [POWER] key for a few seconds. When you print from Illustrator to BN-20, the now printing message is displayed. If you click Cancel button in the message box, but the printing process is still alive. You cannot operate the Illustrator untill the end of printing process. |
Important Notes When Performing Output from CorelDRAW
MEMO:
These are cautionary notes on making output from CorelDRAW using the BN-20 driver.
They are not applied when VersaWorks is used.
| Set the document's color mode to RGB. |
| If you select CMYK mode, the CMYK values will be converted to RGB values when the output is generated.In this case, it may not be possible to perform cutting because the color specified for the driver as the cutting line and the color output from CorelDRAW differ. |