Part Names

Front

No.	Name	Function overview
	Maintenance cover	Remove when performing manual head cleaning.Manual Cleaning
	Front cover	Open the cover to load media; in general use, always keep the cover closed.
	Print-head carriage	The print heads and blade are inside this section.
	[POWER] key	This switches the printer on and off.
	Cartridge slots	Location to install ink cartridges.
	Pinch roller	When you move the loading lever to the front of the machine, the media is pinched. The right pinch roller is fixed in place.
	Platen	This is the path over which the media passes. A print heater that helps fix the ink are built in.
	Media clamps	These keep the media from coming loose and prevent fuzz on the cut edge of the media from touching the print heads.
	Blade protector	This protects the tip of the blade during cutting.
	Grit rollers	These rollers feed out media toward the front of the machine.

Rear

No.	Name	Function overview
	Loading lever	You operate this when you load media.
	USB connector	-
	Main power switch	-
	Power-cord connector	-
	Left media guide	Use this guide when loading media. This guide is on the "Left" when viewing the printer from the front.
	Right media guide	Use this guide when loading media. The guide is on the "Right" when viewing the printer from the front.
	Discharged fluid cartridge	-