Four Different Output Methods
The following four output methods are available for this machine.
| Printing (Only) | Printing by using ink. It is also called "Printing Only" as well to distinguish from "Printing and Cutting." |
| Cutting (Only) | Cutting by using cutter such as for cutting seal. It is also called "Cutting Only" as well to distinguish from "Printing and Cutting." |
| Printing and Cutting | Printing method which performs printing followed by cutting. If sending output data which contains both printing and cutting information to the printer, cutting operation starts after printing finishes. |
| Crop Cut | Outputting method using "Crop Marks" to align printing and cutting result. In a case such as "removing the printed media and performing lamination, and then reloading it and performing cutting," align them using the crop marks and perform cutting. |
Important Points During Use
Use the machine periodically
We recommend using the machine at least once a week. If left unused for a long period of time, the ink may settle, resulting in unstable discharge (and nozzle clogging). Any dry ink will need to be discharged.