Part Names

Front

No.	Name	Function overview
	Maintenance cover	Remove when performing manual cleaning.Manual Cleaning
	Front cover	Keep this cover closed except when necessary, such as when loading media.
	Print-head carriage	The print heads and blade are inside this carriage.
	[POWER]Key	Switches the printer on and off.
	Cartridge slots	The location where ink cartridges are installed.
	Pinch roller	These clamp the media when the loading lever is moved to the front of the machine. The right pinch roller is fixed in place.
	Platen	This is the path over which the media passes. A suction fan that keeps the media from coming loose and a print heater that helps fix the ink are built in.
	Media clamp	These keep the media from coming loose and prevent fuzz on the cut edge of the media from touching the print heads.
	Blade protector	This protects the tip of the blade during cutting.
	Grit roller	These rollers feed out media toward the front of the machine.

Rear

No.	Name	Function overview
	Loading lever	Operate this when you load media.
	USB connector	-
	Main power switch	-
	Power-cord connector	-
	Left media guide	Use this guide when loading media. This guide is on the "Left" when viewing the printer from the front.
	Right media guide	Use this guide when loading media. This guide is on the "Right" when viewing the printer from the front.
	Waste cartridge	-