Procedures from Preparing to Move to Reinstallation

Procedure
  1. Open the Utility window.
    Starting/Exiting Utility

  3. On the Option tab, click Head Wash.
    Proceed with the work by following the on-screen instructions. Do not switch off the power until the work is completed.
    BN-20A_UtilityHeadCl
  4. Move the machine as soon as possible.
  5. Immediately reinstall the machine and fill with ink.
    Refer to "Advance Preparation" and promptly fill the machine with ink.
    IMPORTANT

    Important notes on moving

    • Once the preparations for moving are complete, move the machine and fill it with ink with as little delay as possible. Leaving the machine alone without ink may damage the print heads.
    • When moving the machine, keep it at a temperature of 5˚C to 40˚C (41˚F to 104˚F) and at a humidity of 20%RH to 80%RH (with no condensation). Failure to do so may result in malfunction.
    • Handle the machine with care when moving it, keeping it level (not tilted at an angle) and preventing it from striking other objects.