Turning the Suction Function On or Off
The object to be printed on is suctioned to prevent lifting up of the object. This function is especially effective when the object to be printed on is thin and light.
The suction force setting can be changed to increase or decrease the suction force. For the suction force setting, refer to Setting the Suction Fan Suction Force.
Procedure
Press the [SUC] button.
The suction function turns on (or off).
MEMO
The suction function cannot be used to hold in place curled or thick objects to be printed on. Secure the object to be printed on to the flat table using a substance such as commercially available adhesive tape.