Passo 3: Perform Printing

MEMO Depending on the computer display settings, the Invia a dispositivo or Parametri di stampa window may not fit on the monitor. If this occurs, adjust the magnification and layout in the display settings.
Procedura
  1. Open the printing data created in FlexiDESIGNER.
    Click File - Apri to open the saved printing data.
  2. Click BD-8_Flexi-Icon_SendtoDevice.
    The Invia a dispositivo dialog box opens.
  3. Check the following.
    • Periferica: BD-8
    • Numero di stampe: 1
    • Invia come:Pagina
  4. Click Parametri di stampa.
  5. In the Qualità tab, select the following.
    • Tipo supporto: General or Generic Distance*1
    • Qualità di stampa:Standard
    • Mode: CMYK (v)
    • Layout: Centra sul supporto
  6. Click OK.
    The Print Parameters window closes.
  7. Click Invia.
    Printing starts.
  8. Once printing is complete, remove the object, and exit out of setup in Utility.