Reflecting the Readjusted Flat Table Height in the Media Settings Values

This section explains how to reflect the flat table height for which Readjust has been performed in the media settings. You can overwrite the height of the flat table for registered media.

When printing on the same object, the registered media settings values are used. You can turn on this setting to reduce the time for Readjust if the height of the object varies or if the height of the object changes due to layered printing.

Print time is reduced, but print quality tends to be lower because the distance between the print heads and the object is lengthened. If print quality is important to you regardless of whether it takes more time to print, you should turn off this setting.

Procedure
  1. On the Utility home screen, click BN2_Utility_Icon_MENU.
  2. Click Preferences.
  3. Select the Maintain Height after Readjustment check box for Clearance Settings - Operation on Height Error Detection.
  4. Click Apply to confirm your entry.
  5. Click Close to return to the original screen.
    MEMO
    • Default settings
      • Maintain Height after Readjustment: Cleared