Setting the Reference Position of the Flat Table in the Vertical Direction

Select whether the base position (0 mm [0 in.]) in the flat table height direction should be set to "Lowest position: Height (H)" or "Highest position: Thickness (T)."

Procedure
  1. On the Utility home screen, click BN2_Utility_Icon_MENU.
  2. Click Preferences.
  3. In Flat Table Height/Object (Media) Thickness, select one of the following.
    Height (H) BD-8_FlatTable_Height Set the base position (0 mm [0 in.]) as the lowest position of the flat table. This indicates how much the flat table rises when the object is set up (flat table height: H).
    Thickness (T) BD-8_FlatTable_Thickness Set the highest position of the flat table to 0 mm. This indicates how much the flat table lowers when the object is set up (object thickness: T).

    A: Print heads

  4. Click Apply to confirm your entry.
  5. Click Close to return to the original screen.
    MEMO
    • Default setting: Height (Lowered Flat Table Treated as Height of 0)