Replacing the Drain Pack
Ink left in the print heads after printing or ink used for head cleaning is called discharged fluid. The discharged fluid is collected in a drain pack, and when the specified amount is reached, a replacement message is displayed in Utility.
-
When output, cleaning, and other operations are completed, discard the discharged fluid.
At this time, the drain pack has not reached the limit of its use. It can continue to be used if, for example, a replacement drain pack is not readily available. However, the drain pack should be replaced as soon as possible.
-
Replace the drain pack.
This indicates the usage limit of the drain pack. If this error appears, the drain pack can no longer be used.
The machine is calculating the total amount of discharged fluid. When the amount of discharged fluid reaches near the capacity of the drain pack, the system will issue a message to replace it. If the discharged fluid is not disposed of according to the following procedure, the amount of discharged fluid will not be reset and it will be impossible to control the discharged fluid.
Be sure to replace the drain pack as directed in the displayed message.
Never place the drain cartridge or ink near an open flame.
Doing so may cause a fire.
Before you remove the drain cartridge, wait for a message to be displayed in Utility.
Failing to follow this procedure may cause discharged fluid to flow out of the tube and spill, soiling your hands or the floor.
When temporarily storing drain packs, you can store them in a sealed container or plastic bag.
Any spillage or vapor leakage may cause fire, odor, or physical distress.
- Do not reuse drain packs.
Doing so makes it impossible to manage the amount of discharged fluid, which may overflow.
- Dispose of discharged fluid properly, in accordance with the laws in effect in your locale.
Discharged fluid is flammable and contains toxic ingredients. Never attempt to incinerate discharged fluid or discard it with ordinary trash. Also, do not dispose of it in sewer systems, rivers, or streams. Doing so may have an adverse impact on the environment.
| Required item |
|---|
 |
| Drain pack |
Use the following link to view a reference video for this procedure. We recommend that you view this video to understand the overall flow of work.
- Open the front cover, and then remove the maintenance cover.
- Wear protective gear (gloves and glasses).
-
Remove the drain cartridge.
Pull the drain cartridge out until you can support its base with your hand. Then, remove this cartridge by holding its handle and its base.
IMPORTANTDo not drop the drain cartridge or subject it to impacts. Damage to the protrusion on the drain cartridge will make it impossible for the machine to recognize the drain cartridge, and the The drain cartridge was removed. message will be displayed continuously even when the drain cartridge is installed.
-
Release the hooks in two locations to unlock the drain cartridge lid, and then open it.
-
Lift up the flap of the drain pack to remove it from the drain cartridge.
Pull up the drain pack by holding its sides, as pulling it by the flap may tear it.MEMO
Ink adheres when touching the drain pack's hole.
-
Insert a new drain pack into the drain cartridge.
Insert the drain pack so its hole (B) is on the opposite side to the handle (A) of the drain cartridge.
-
Close the drain cartridge lid.
Align the hole in the lid of the drain cartridge and the drain pack's hole, and then close the lid from the handle side. If the lid is not flush with the cartridge, gently press down around the circumference of the lid to fit it into the cartridge.
-
Insert the drain cartridge into the machine.
Put your hand on the bottom of the drain cartridge and push it in slowly with the horizontal or handle side in a slightly raised state.
- Attach the maintenance cover, and then close the front cover.
-
When Has the drain pack been replaced with a new one? appears, click Yes to close the message.
For information about purchasing drain packs, contact your authorized dealer.