Step 2: Change the IP address.

Procedure
  1. On the Utility home screen, click AP-640_Panel_Icon_MENU.
  2. Click System Information.
  3. Clear the Obtain IP Address Automatically check box under Network.
  4. Enter the machine network addresses determined under Step 1: Determine the network addresses..
    BD-8_Utility_SysInfo_NetworkSetting
  5. Click Apply.
  6. Click Close to return to the original screen.
  7. Start Roland DG Connect Hub.
  8. Click Settings, and then clear the Auto printer registration check box.
  9. Click Settings - Printer settings.
  10. Click +, and then enter the IP address determined under Step 1: Determine the network addresses. in the address field.
  11. Click Verify, and then click Apply.
  12. Click OK.
    MEMO
    If it is not possible to connect the computer and the machine during reinstallation (such as when relocating a machine with a fixed IP address), press the reset button to switch to automatic IP address acquisition.
    1. Switch off the sub power.
    2. Use a paper clip or something similar to hold down the reset button (A) for 5 seconds or longer.

      You will hear a short beep when you press the reset button. If you hold down this button for at least 5 seconds from this point, you will hear two short beeps and the machine will reset.

    BD-8_ResetSW