Step 4: Configure the FlexiDESIGNER settings.

Procedure
  1. Open Roland DG Connect Hub.
  2. Select the machine to connect to, and then click Open next to VersaWorks 6.
  3. Set the machine to connect to FlexiDESIGNER.
    VersaWorks will automatically search for and register the connectable printers. However, if the search finds zero printers or five or more printers, you will have to register printers manually.
    • When the detected number of printers is one to four
      1. Check the detected printer(s) and click OK.
      2. When the message Do you want to install the virtual printer driver? is displayed, click Yes.

        This message does not indicate the printer driver to use in communication. It indicates the virtual printer driver to use when printing directly from the application.

      3. When the User Account Control window appears, click Yes (or Allow).
      4. When the Add Printer Wizard window appears, click Continue.

        Registration is complete once the machine information is displayed in the top menu.

    • When no printers or five or more printers are detected
      1. Enter the IP address of the printer and click Verify.

        Items such as the Model Name and Firmware Version are displayed.

        MEMO If the printer is not displayed, check the LAN cable connection status.
      2. Set the Nickname.

        If you do not set a nickname, the model name is displayed.

      3. Click Apply.
        BD-8_VW-PrinterSetting
      4. When the message Do you want to install the virtual printer driver? is displayed, click Yes.

        This message does not indicate the printer driver to use in communication. It indicates the virtual printer driver to use when printing directly from the application.

      5. When the User Account Control window appears, click Yes (or Allow).
      6. When the Add Printer Wizard window appears, click Continue.

        The information of the connected printer appears in the Printer List.

      7. Click OK.

        Registration is complete once the machine information is displayed in the top menu.