Deodorizer

Since UV ink has an odor that may affect the human body, this machine is equipped with a deodorizer.

The deodorizer has four modes, as shown in the table below. Since there is a trade-off between the service life of the filter and its deodorizing performance, use the filter as appropriate for your usage situation.

Deodorizing performance varies depending on the mode and suction power. Each mode has a default suction power setting, which can then be set from 20% to 100% in 10% increments.

For information about purchasing filters, contact your authorized dealer or visit our website.

Mode Deodorizing performance Suction power default settings
Strong

Activated when main power is on, sub power is on, or during printing. This setting emits the least amount of odor to the exterior of the machine. This mode reduces odors coming out of openings in the machine even when the machine is not in use.

In this mode, you can set the pause time for the deodorizer.
  • When Printing: 50%
  • When Sub Power On: 40%
  • When Main Power On: 20%
Medium Activated when sub power is on, or during printing. This mode reduces odors when the front cover is opened during operations such as loading objects.
  • When Printing: 50%
  • When Sub Power On: 40%
Weak*1 Activated only during printing. This mode is intended for users in backyards and other areas that are normally unoccupied and well-ventilated.
  • When Printing: 50%
Off Deodorizing not activated. －
*1 Default settings
MEMO
  • Recommended Filter Replacement Time
    • Once every year.

      However, the deodorizing performance decreases with frequency of use. If you start to smell odors coming from near the machine, replace the filter even if it has been in use for less than a year.