Part Names and Functions

Front

TOP

No.	Name	Function overview
	Front cover	Prevents contact with the print-head carriage and other such fast-moving parts when the machine is operating. This cover also reduces dust and keeps UV light and odors out. Keep it closed except when placing objects or when performing maintenance.
	Ink slots	Ink cartridges are inserted into these slots.
	Head gap sensor	Detects the height of the object to be printed on.
	Deodorizer	Eliminates UV ink odor.
	Maintenance cover	Remove the maintenance cover when replacing the drain pack, cleaning the UV-LED device, or removing and installing the optional items (OA-RA-8). Keep it closed except when it is necessary to open it.
	Sub power button	Switches the sub power of the machine on/off.
	Emergency stop button	This button allows you to stop the machine immediately when it performs an action you did not intend.
	UV-LED device	Shines the UV light used to cure the ink.
	Print-head carriage	The print heads are inside this carriage.
	Pointer	Illuminates in the direction of the flat table with LED light that indicates the print origin or printing area.

Bottom

[A]: Standard Position [B]: Manual Cleaning Position

No.	Name	Function overview
	Felt wiper	Cleans the edges of the print heads after wiper operation. Absorbs residual ink and dirt from the edges of the print heads.
	Wiper	Cleans the print heads. Removes dirt and excess ink from the print heads.
	Scraper	Removes ink and dirt that have adhered to the wiper.
	Cap top	Prevents the print heads from drying out. Seals to the print heads to protect the ink emission surface when the print-head carriage is at the right side of the machine, such as when waiting for printing.
	Flat table	Table on which the object is placed.
	Drain cartridge	Accumulates the discharged ink. If the drain pack in this cartridge is full of discharged fluid, a message prompting you to replace the pack will appear in the Utility window. If this message appears, replace the drain pack in the drain cartridge.

CAUTION

Do not place your hands on or touch the flat table or inside the machine (except for the cartridge slots).

Doing so may cause burns.

CAUTION

Do not place any objects in front of or behind the flat table.

The flat table moves horizontally and vertically. If there is an object between the flat table and the machine, it can be caught and cause the machine to malfunction.

Side

No.	Name	Function overview
	Ethernet connector	Use this to connect an Ethernet cable.
	Main power switch	Switches the main power of the machine on/off.
	Power-cord connector	Used to connect the power cable from which power is supplied to the machine.

Manual Cleaning Tool

No.	Name	Function overview
	Manual cleaning tool body (fixed part)	Attach this to the machine during manual cleaning.
	Cleaning part (moving parts)	This is the part that moves when the cleaning stick is attached and manual cleaning is performed.
	Pad	Absorbs cleaning liquid or discharged fluid that drips from the cleaning stick.
	Manual cleaning tool retaining screw	Fixes the manual cleaning tool to the machine.

IMPORTANT

Do not use a manual cleaning tool that may have been deformed by striking or dropping it. Instead, replace it before cleaning.

Using a deformed manual cleaning tool may prevent manual cleaning from being carried out properly or damage the machine.

Only attach the manual cleaning tool to the machine when performing manual cleaning work.

The machine's internal operation may cause the flat table and manual cleaning tool to come into contact, damaging the machine and the manual cleaning tool.

MEMO

We recommend that the manual cleaning tool be left in front of the deodorizer when not in use.
We recommend keeping the manual cleaning tool retaining screw in the area shown in the figure to prevent loss.

Machine State Indicated by the Sub Power Button's Lamp

The machine states are indicated with sub power button colors and flashing patterns. The sub power button allows you to check the state of the machine at a distance.

Lamp		Machine state
	Off	Power off
	Lit in green	Printing
	Lit in blue	Object has not been set up, such as during maintenance operations.
	Flashing in blue	The machine is starting or is in sleep mode.
	Lit in yellow	Setup of the object is completed, and it is ready for printing.
	Flashing in yellow	The machine is paused.
	Lit in red	When an abnormality occurs in the machine, or when the emergency stop button is pressed.