Printing on a Thick, Transparent Object

Transparent objects with a thickness of 20 mm (0.79 in.) or more require more frequent cleaning. To avoid cleaning during printing, create print data as follows.

  • Create print data that is long in the vertical direction, and then print with the printing area arranged vertically.
    You can increase the time until cleaning if the width is 100 mm (3.94 in.) or less.
    BD-8_ClearThickObject
  • When printing white above or below CMYK, print the white plate and the CMYK plate separately.

    Introduction to FlexiDESIGNER:https://downloadcenter.rolanddg.com/BD-8