Attaching/Removing the Maintenance Cover

Work performed with the maintenance cover removed includes replacing discharged fluid packs, removing and installing optional items and stored fixtures, and similar tasks. Keep the maintenance cover securely attached except when necessary.

Procedure
  1. Open the front cover.
    Opening/Closing the Front Cover
  2. Remove the maintenance cover according to the following procedure.
    1. Hold the underside of the maintenance cover, and pull it approximately 30 mm (1.18 in.) towards you.
    2. Lift the maintenance cover up to remove it.
    BD-8_RemoveMaintenanceCover
  3. Perform the necessary work.
  4. Attach the maintenance cover according to the following procedure.
    1. Insert the hooks (B) on the maintenance cover into the grooves on the left and right (A).
    2. Press the maintenance cover against the machine.
      Make sure the maintenance cover is secured by the magnets (C).
      BD-8_InstallMaintenanceCover
  5. Close the front cover.