Opening/Closing the Front Cover

Most operations, such as setting up objects, removing and attaching ink cartridges, and maintenance, are performed with the front cover open. To reduce odors and prevent the print heads from drying out, keep the front cover closed except when opening it is necessary.

Procedure
  1. Make sure there are no foreign objects on the top of the front cover.
    CAUTION

    When opening the front cover, do not place hands or objects in the area shown in the figure.

    Doing so may result in injury from pinching fingers or damage to the front cover.

    BD-8_FcoverOpenNote
  2. Hold the position shown in the figure and open the front cover.
    BD-8_FcoverOpen
  3. Perform the necessary work.
  4. Check the following before closing the front cover.
    • A: There are no foreign objects between the front cover and the machine
    • B: The maintenance cover is installed

    BD-8_FcoverCloseNote

  5. Close the front cover.