Step 5: Reinstalling the Machine

Procedure
  1. Once the preparations are complete, move the machine with as little delay as possible.
  2. Reinstall the printer immediately, and then remove the retainer securing the print heads in place.

    AP-640_RemoveKoteigu_Isou

  3. Install the retainer at the position indicated in the figure for storage.

    AP-640_koteigu1-2

  4. Turn on the main power switch.
    IMPORTANT

    To prevent the print heads from being damaged, move the machine with as little delay as possible and switch on the main power as soon as possible after moving the machine. To install the machine again, follow the procedure in the Setup Guide.

  5. Press the sub power button.
    The home screen appears, and then the machine is filled with cleaning liquid.
  6. Check that the print heads are not dirty.
    If they are dirty, follow the procedure below to clean them.
    1. Tap AP-640_Panel_Icon_MENU on the operation panel.
    2. Tap Cleaning - Manual Cleaning.
    3. Tap Execute.

      The print heads move to the left end of the machine. Check that the areas around the print heads are not dirty. If they are dirty, perform manual cleaning.