Using an Auxiliary Drying Unit (DU3)

This setting is required when using an auxiliary drying unit (DU3). When Extended Dryer is set to Enable, the temperature is set to the same temperature as the printer's dryer. When Blower Fan is set to Enable, the blower fan turns during printing.
Procedure
  1. Set up the media.
  2. Tap AP-640_Panel_Icon_MENU.
  3. When using Extended Dryer, configure the settings as shown below.
    1. Tap Preferences - Extended Dryer.
    2. Select Enable.
    3. Tap Save to confirm your entry.
  4. When using Blower Fan, configure the settings as shown below.
    1. Tap AP-640_Panel_Icon_BACK to go back to the original screen.
    2. Tap Blower Fan.
    3. Select Enable.
    4. Tap Save to confirm your entry.
  5. Tap AP-640_Panel_Icon_HOME to go back to the original screen.
    MEMO

    • Default settings

      • Extended Dryer:Disable
      • Blower Fan:Disable

    • For information about the DU3, contact your authorized dealer or visit our website (https://www.rolanddg.com/).

    • For details on how to use the DU3, refer to its documentation.