2. Clean the print heads.

Procedure
  1. Moisten a new cleaning stick with the cleaning liquid.
    IMPORTANT
    1. Be sure to use one of the included cleaning sticks.
    2. Do not use a previously used cleaning stick.
    3. Do not put a previously used cleaning stick into the cleaning liquid.


  2. Use the wide surface of the cleaning stick to wipe away any dirt from the locations shown in the following figure.
    Be especially careful to clean away any fibrous dust (lint). Also wipe with the opposite, clean surface, ensuring that dirt from the dirty surface does not adhere to the head.
    • Head
      IMPORTANT Be careful not to wipe off the grooves on the head surface ().

      Cleaning the print head_groove
    • Edges and sides of the head ()

      Head cleaning_ER-642_1
    • Around the head

      If this area has any ink or cleaning liquid that appears likely to drip, use a dry cloth that is not fluffy to gently wipe away the ink or cleaning liquid.


      Head cleaning_ER-642_3
  3. Close the left cover.
  4. Tap Finish All.

    Normal cleaning in progress. is displayed at the top of the screen, and cleaning starts.

    The (approximate) remaining time for the procedure is displayed on the screen.

  5. Tap AP-640_Panel_Icon_HOME to go back to the original screen.