Performing Feed Correction during Output

Feed correction may result in reduced print quality, depending on when it is performed. Perform this operation at the appropriate timing.
Procedure
  1. Tap Feed Correction.

    Dynamic feed compensation
  2. Check the printed surface. If noticeable overlapping is present, tap AP-640_Panel_Icon_PLUS to change the correction value.
    If noticeable gaps are present, tap AP-640_Panel_Icon_MINUS.
  3. Tap Save.
    The entered correction value will be applied to printing.
  4. Tap AP-640_Panel_Icon_HOME to go back to the original screen.