Changing the Media Settings

Use the following procedure to change the media settings. These settings can only be changed for the media being set up.

Procedure
  1. Set up the media.
  2. Tap AP-640_Panel_Icon_MENU.
  3. Media Settings - List of Media Settings
  4. Tap the setting to change to move to the screen for editing this setting.
    The media settings that can be changed are as follows.
    Menu item Reference page
    Print Head Height Changing the Print Head Height
    Feed Correction Manual Adjustment: Reducing Horizontal Bands (Feed Correction)
    Media Gap Adjustment Manual Adjustment: Adjusting the Misalignment of the Ink Landing Position (Media Gap Adjustment)
    Heater Temperature Setting the Print Heater TemperatureSetting the Dryer Temperature
    Dry After Printing Drying the Trailing Edge of the Printing Area on the Dryer
    Multi Sensor Adjustment Correcting the Reading Sensor
    Drying Time Per Scan Using Hard-to-Dry Media
    Media Suction Force Using Media That Wrinkles Easily/Does Not Move Smoothly
    Printing Movement Range Speeding Up Output for Narrow Media
    Media Sticking Prevention Using Sticky Media
  5. If you have changed a setting, tap Save.
  6. Tap AP-640_Panel_Icon_HOME to go back to the original screen.