Changing the Print Head Height

This adjusts the print head height to prevent media that is wrinkled or comes loose from the platen from contacting the print heads.

You can select the print head height from Low, Medium, and High. Printing quality when the print head height is set to Medium or High may be coarser or otherwise lower than when set to Low.

Procedure
  1. Set up the media.
  2. Tap Panel_Icon_Menu.
  3. Tap Media Settings - Printing Settings - Print Head Height.
  4. Tap Change.
    The print head carriage moves to a position where they can be operated.
  5. Open the front cover.
  6. Move the height-adjustment lever to adjust the head height.
    When you change the position of the height-adjustment lever, the screen changes and the buzzer sounds at the same time.

    LG_HeadHeightLMH
    Position Operation panel display Description
    Low Normally set the height-adjustment lever to Low.
    Medium For media that is wrinkled or comes loose from the platen during printing, set the height-adjustment lever to Medium.
    High For media that is wrinkled or comes loose from the platen during printing even when the height-adjustment lever is set to Medium, set the lever to High.
    IMPORTANT The printing quality degrades as the distance between the media and the print heads increases. Do not move the height-adjustment lever to Medium or High needlessly.
  7. Close the front cover.
  8. Tap OK.
    The print head carriage moves to their original position.
  9. Tap Panel_Icon_Home to return to the home screen.
    MEMO

    • Default setting: Low

    • If degradation of printing quality occurs after raising the print head height, refer to the following information and try optimizing the quality.