1. Replace the blade.

Procedure
  1. Remove any media.
  2. Tap Panel_Icon_Menu.
  3. Tap Maintenance - Blade Replacement.
    The Blade Replacement screen appears.
  4. Tap Execute.
    The cutting carriage moves to a position where blade replacement is possible.
  5. When Open the front cover. appears, open the front cover.
    MEMO The procedure is displayed on the operation panel.
    • Tap Panel_Icon_Left_Blue or Panel_Icon_Right_Blue to check the procedure.
    • If you complete the work without viewing the instructions, tap Finish All.
  6. Detach the blade holder.


  7. Replace the blade.
    1. Press the pin () to push out the old blade ().


    2. Insert a new blade.
      Insert the blade into the hole so the blade tip is on the outside.
      blade1
  8. Install the blade holder into the cutting carriage.


  9. Tighten the screw.
    Tug the blade holder upward to make sure it does not come loose.


  10. When the replacement of the blade is complete, tap Finish All.
  11. When Close the cover. appears, close the front cover.
    When you close the front cover, you are returned to the original screen.
  12. Tap Panel_Icon_Home to return to the home screen.