Replacing the wiper cleaner

The wiper cleaner removes ink, dust, and similar substances that have adhered to the wiper during cleaning.

Replacement is necessary if the The time for wiper cleaner replacement has arrived. message appears.

For information about purchasing wiper cleaners, contact your authorized dealer or visit our website (https://www.rolanddg.com/).

WARNING

Be sure to perform operations as specified by the instructions, and never touch any area not specified in the instructions.

Sudden movement of the machine may cause injury.

Required items

Pad_Wiper

2-Tweezers
Wiper cleaner Tweezers
Procedure
  1. When the message The time for wiper cleaner replacement has arrived. appears, tap OK.
  2. Remove any media.
  3. Tap Panel_Icon_Notification to display the messages.
  4. Tap The time for wiper cleaner replacement has arrived..
    WiperCleaner_Panel
    The Wiper Cleaner Replacement window appears.
  5. Tap Execute.
  6. Tap OK.
    The print-head carriage moves to a location where wiper cleaner replacement is possible.
  7. When Open the right cover. appears, open the right cover.

    XP_RvoverOpen
  8. Touch the location shown in the figure to discharge any static electricity.

    Dissipates static electricity
  9. Tap Finish.
  10. When Open the flushing cover. is displayed, open the flushing cover while grasping the part indicated by .

    Open the flashing cover_1
    MEMO The procedure is displayed on the operation panel.
    • Tap Panel_Icon_Left_Blue or Panel_Icon_Right_Blue to check the procedure.
    • If you complete the work without viewing the instructions, tap Finish All.
  11. Use a pair of tweezers to replace the wiper cleaner.
    1. While pressing the lock to the left, open the wiper cleaner cover.

      Press the lock to open the wiper cleaner cover
    2. Remove the wiper cleaner from the protrusions (A) used for positioning, and then pull the cleaner up and out.

      ReplaceCleanerWiper1
    3. Dispose of the detached wiper cleaner.
    4. Attach the new wiper cleaner.
      Insert the wiper cleaner so the holes (A) match the protrusions (B). The wiper cleaner does not have a specified front or back. They can be attached with either orientation.

      ReplaceCleanerWiper2
  12. Close the wiper cleaner cover and the flushing cover.
    Firmly push the wiper cleaner cover closed to ensure that it is locked.

    MaintenanceCover2
  13. When the wiper cleaner replacement is finished, tap Finish All.
  14. When Close the cover. appears, close the right cover.
    When you close the right cover, you are returned to the original screen.
  15. Tap Panel_Icon_Home to return to the home screen.