Step 1: Removing Media and the Blade Holder

Procedure
  1. Remove any media.
    MEMO If no media is loaded, raise the loading lever.

    ER-642_Loading-lever-up
  2. Tap Panel_Icon_Menu.
  3. Tap Maintenance - Blade Replacement.
    The Blade Replacement screen appears.
  4. Tap Execute.
    The cutting carriage moves to a position where blade replacement is possible.
  5. When Open the front cover. appears, open the front cover.
  6. Detach the blade holder.
  7. Tighten the screw.
  8. Tap Finish All.
  9. Close the front cover.