Specifications
| Printing method | Piezo ink-jet method | ||
| Media | W | 335 to 1.625 mm (13.2 to 64 in.) | |
| Thickness |
Maximum 1.0 mm (39.3 mil) with liner, for printing Maximum 0.4 mm (15.7 mil) with liner and 0.22 mm (8.6 mil) without liner, for cutting |
||
| Roll outer diameter | Max. 250 mm (9.8 in.) | ||
| Roll weight | Max. 45 kg (99 lb.) | ||
| Core diameter | 76.2 mm (3 in.) or 50.8 mm (2 in.) | ||
| Printing/cutting width*1 | Max. 1,600 mm (62.9 in.) | ||
| Ink | Type | Eco-Solvent Ink (TR3) 500 ml cartridge (white only 220 ml) | |
| Colors |
Eight colors (cyan, magenta, yellow, black, light cyan, light magenta, orange, and green) Seven colors (cyan, magenta, yellow, black, orange, green, and white (2 cartridges)) Four colors (cyan, magenta, yellow, and black) |
||
| Printing resolution | Max. 1,800 dpi | ||
| Cutting speed | 10 to 300 mm/s (0.39 to 11.8 in./s) | ||
| Blade force*2 | 30 to 500 gf | ||
| Blade | Type | Roland CAMM-1 series compatible | |
| Offset | 0.000 to 1.500 mm (0.000 to 0.059 in.) | ||
| Software resolution (when cutting) | 0.025 mm/step (0.98 mil/step) | ||
| Media heating system*3 |
Print heater set temperature: 30 to 45°C (86 to 113°F) Dryer set temperature: 30 to 55°C (86 to 131°F) |
||
| Connectivity | Ethernet (100BASE-TX/1000BASE-T, automatic switching) | ||
| Power-saving function | Automatic sleep feature | ||
| Rated input |
100-120/220-240 Va.c. 50/60 Hz 8.9/4.5 A |
||
| Power consumption | During operation | Approx. 1,180 W | |
| Sleep mode | Approx. 50 W | ||
| Acoustic noise level | During operation | 66 dB (A) or less | |
| During standby | 56 dB (A) or less | ||
| Dimensions (width × depth × height) | 2,886 mm (113.62 in.) × 748 mm (29.45 in.) × 1,415 mm (55.71 in.) | ||
| Weight | 196 kg (432 lb.) | ||
| Environment | During operation*4 | Temperature: 20 to 32°C (68 to 89.6°F), humidity: 35 to 80%RH (no condensation) | |
| Not operating | Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no condensation) | ||
| Included items | Dedicated stand, power cord, media take-up unit, media holders, replacement blade for separating knife, cleaning liquid bottle for maintenance, drain bottle, User's Manual, software (VersaWorks, Roland DG Connect Hub), etc. | ||
*1 The length of printing or cutting is subject to the limitations of the application software.
*2
- 500 gf is the maximum instantaneous blade force.
- The blade force must be adjusted according to details such as the media thickness.
*3
- Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
- Depending on the ambient temperature and the media width, the set temperature may not be reached.
*4 Operating environment (Use the machine in an operating environment within these ranges.)
