Changing Cutting Line Colors: Job Assistant

You can set the color of the cutting line created with Job Assistant to make it easily distinguishable from the print data.

Procedure
  1. Use one of the methods below to open the Job Assistant window.
    • Right-click the job to set, and then click Edit Design - Job Assistant.
    • With the job to set selected, click VW7-ICON_JobMenu1 on the left side of the job menu, and then click VW7-ICON_JobAssistantJob Assistant.
  2. Click VW7-ICON_Customize.
  3. Select a color from Cutting Line under Color Settings.
    You can also select the Perforated Cutting Line color.
  4. Click OK.
  5. Check the message that appears, and then click Yes.
    The Job Assistant window closes, and a job with the set cutting line color is added.