Configuring the Queue Folder

This is used to make settings (dedicated settings such as specific media or request details) common to all print data added to the queue folder. In cases such as when the media used or printing specifications are the same, configuring the queue property settings will eliminate the need to configure the job settings for each print data.

Configure the settings of the queue folder in the Queue Properties window.

  • The settings are applied to the print data to add to the set queue folder.
  • This section explains how to configure the minimum settings required for printing (the size and type of the media to use in printing and the printing quality). Configure other settings according to the application.
NOTA If you are unfamiliar with VersaWorks operation or are not prepared to configure dedicated settings, you do not have to configure the Queue Properties settings. You can configure Definições for each print data entry to print with the same settings as if you had configured the Queue Properties settings.
Procedimento
  1. Click VW7-ICON_Customize for the queue folder to be used.
    The Queue Properties window appears.
  2. Enter the desired name in Nome da fila.
    VW7_InputPropertiesName
  3. To set the size of the material, click VW7-ICON_LayoutEsquema and perform the following procedure.
    • Manual setup
      • Select the desired size from Definições do material - Tam..
      • To specify a size, select CustomROLL or CustomCUT, and then set Largura and A.
    • Automatic setup
      1. Set up the media.
      2. Click Definições do material - Obter largura do material.
        VW7_Make initial settings for input folder_3

        Obtain the Largura and A for the media that has been set up, and then configure the settings.

  4. Click VW7-ICON_Quality.Qualid.
  5. Select the type of the media to print on from Definições de qualidade - Media Name.
    VW7_Make initial settings for input folder_5
  6. Use Qualidade de impressão to select the printing quality.
    VW7_Make initial settings for input folder_6
  7. Click OK.
    The Save Settings confirmation screen appears.
  8. Click OK.
    The configured printing settings are saved, and you are returned to the main screen.

    You can also configure many other settings for the queue folder.

    For other settings, refer to the Definições list in the VersaWorks 7 Master Guide.